Unitised versus Stick Built Curtain Walls: What’s Perfect for your Building Façade?

High rise towers and monumental buildings now provide a stunning panoramic view of the urban landscape and have ample natural lighting conditions inside. Ever wondered what ensures so? It’s none other than curtain wall glazing system in the words of curtain wall contractors in the UK. It’s a structure that covers the commercial buildings from outside to promise not just the above stated but also safeguard them from outdoor elements. Needless to say, it has turned out to be a popular choice among building owners. Plus, the aluminium façade has every potential to stand upright, given its light weight.





However, the dilemma arises, when one comes in contact with two options when choosing curtain walls. The blog provides an insight into both the systems to help you pick the ideal one for your commercial building.

  1. Unitised System

Such a curtain wall system is manufactured, assembled and glazed within a factory, ready to be picked up with cranage facilities for installation purposes. On site, the units are then erected with the help of anchors and fitted into the buildings.

The system has its set of advantages, making it a preferred curtain wall across corporate clients. The benefits mostly originate from its fabrication and installation methods. Enlisted are all four:

Ø  It takes little time to install. In figures, this corresponds to 33% of the time, required to build a Stick Built System.

Ø  A unitised curtain wall is usually of superior quality since it’s manufactured and glazed in a climate-controlled environment.

Ø  A quick installation lowers the labour costs.

Ø  Meets the high-performance needs of areas where wind load is excessive.

Despite the superiority of this system, corporate clients have an alternative at hand. Let’s check out the same in the next section.

  1. Stick Built System

Sometimes, a project fails to match the criteria set by a unitised system. This is when the Stick Built System steps in. The name got inspired by the use of long aluminium pieces, set up vertically and horizontally to distribute the glass load throughout the structure. You will find their application mostly in low to mid-rise curtain wall systems. Besides the stated reason for their popularity, such facades also promise the following set of advantages:

Ø  It’s an economical choice for those settling with lower volumes.

Ø  Short lead times, as compared to a unitised system, where the latter requires 6-12 months to complete.

However, it mostly suffers from certain disadvantages. For instance, installation is time-consuming as fabrication and glazing occur on site. Sometimes, space constraints also pose a challenge because the materials need ample space for storage.

Which One is the Ideal Curtain Wall?

While it might seem that the unitised system enjoys a better position as compared to Stick Built System as the latter suffers from certain disadvantages, unlike the former, the reality is different. Frankly speaking, both are necessary because the conditions and requirements of a job site are never similar. Therefore. façade companies like Eirefacade Systems perform meticulous assessments to determine the most suitable curtain wall for a building. In simple words, be a little flexible by not developing a preconceived notion about a certain system. Rather adapt accordingly and enjoy a unique architectural design on your building. Contact Eirefacade Systems today to clear out any of your confusions regarding such structures.

 


Comments

  1. herymeelonAugust 13, 2021 at 4:19 AM

    And so the surpasse thesis conjecture rim might be the copys that is totally equipped beneficials the teeth, busy people information about the fussy among mien's plus factorys requirements. façade cleaning uk

    ReplyDelete

Post a Comment

Popular posts from this blog

Potentials of Brick Slip and Terracotta Facade in Contemporary Architecture

Image
The use of Terracotta Cladding for facades is nothing new and is rather more an age-old concept. But what the classic concepts have brought to life for modern architecture, apart from the straightforward installation and extreme cost-effectivity, is increased environmental values for the building and the construction process. Terracotta is sourced from clay, and the natural material can be used for ventilated exterior walls, sunscreen, and rainscreen facades with slip brick cladding. A Terracotta Facade can naturally cool down the temperature in scorching climate. This feature alone can optimise the thermal performance of the building and reduce the overall carbon footprint. The energy performance obtained from the terracotta cladding facade design can fulfil a large portion of the thermal regulations practised in the Irish regions. The ventilated walls of a terracotta brick slip facade give the building a heightened heat capacity or thermal effusivity, and reduced effects of therma...
Read more

Aluminium Façade: What Makes it the Choicest Material in Façade Systems?

Image
The application of façade systems dates back to 1600 when ancient people used them to innovate their buildings. Stones were typically their chosen materials for big churches and mansions. However, as time took a leap, the demand for superior materials like metals grew among people. To cater to the rising demand for modern and superior metals, façade specialists started introducing steel, brick, zinc, brass and copper to construct architectural claddings. Among them, the aluminium façade enjoys more popularity today. Wondering why? Scroll down to explore the underlying reasons. Advantages of Constructing a Façade with Aluminium Despite the various material choices for designing the front side of a building, aluminium enjoys greater acceptance among people. The reasons entailing material qualities have been listed down for your convenience. Take a look for confirming your choice. v Lightweight Aluminium is easy to deal with. It’s lightweight as compared to steel and weighs onl...
Read more

Best Options of Rainscreen Systems That A Leading Irish Rainscreen Contractor Can Get You

Image
  There are so many different terms to define Rainscreen Systems, that buyers are so often confused. So if you are looking for a solution, the best place to start is to have a clear understanding of what a Rainscreen really is, and what are its capabilities. Then it would be easier to understand the technologies that make it more advanced. The First Step Is To Understand What Is A Rainscreen Rainscreens are protective siding or cladding systems, whose sole job is to keep away rainwater from entering the building and act as a barrier over the building facade or entire envelope. It is a structure, that is more like a raincoat for the building. Rainscreens form the outermost barrier in the exterior wall detailing of a building. So a typical wall construction would have the following order, from inwards out:   Main Structural Wall Air Barrier Exterior Insulation Drainage Cavity for Ventilation Rainscreen Cladding   Hailing from the U.S, this ext...
Read more